エレコム Elecom TBWDSZARMBEDBK Tablet Stand, Arm Stand, iPad Stand, Fire HD 10, Fire HD 8, Smartphone/iPhone Stand, Bedside Mountable, 360° Rotation, Z Arm Type, Compatible with 4.6-11 Inches, Black

Flexible arm stand for smartphones and tablets that can be fixed vertically or horizontally. The clamp can be switched vertically or horizontally according to the location you are installed. When fixed vertically it can be attached to the headboard of the bed, so it can be used horizontally, or when fixed horizontally, it can be attached to a side table, etc. The flexible arm and tip arm allow you to adjust the distance and height between the device and the face to the desired position. The connection part of the holder uses a ball joint, so you can freely adjust the angle and orientation. Charging cable can be connected while the device is in the holder. The holder part is equipped with a silicone material to prevent the device from slipping. ●Compatible with 4.6 - 12.9 inch smartphones and tablets. Due to the structure of this product, if the device is installed directly downward, it may fall off from the holder, so please be sure to install it at an angle. When changing the direction of the flexible arm, please note that depending on the angle of the screw at the bottom of the arm, the arm fixing screws on the clamp. This product meets or exceeds Elecom environmental certification standards and displays the "THINK ECOLOGY" mark. Our commitment to environmental protection, the weight of the plastic in the packaging containers is reduced by over 20% than our in-house standards.

• 2-way flexible arm stand for smartphones and tablets that can be fixed vertically or horizontally. The
• clamp can be switched vertically or horizontally to suit the installation location. The
• vertical mounting allows it to be mounted to the bed headboard, so it can be used horizontally or horizontally to be attached to a side table, etc. The
• flexible arm and tip arm allow you to adjust the distance and height of the device body and face to the desired position. The connection part of the
• holder uses a ball joint so you can freely adjust the angle and orientation. Charging cable can be connected while the device is in the holder